เส ไทยแลนด์ เราเชี่ยวชาญด้านมือถือ
Service Tools => SuperDoctor => ข้อความที่เริ่มโดย: luckyboy01 ที่ กันยายน 02, 2011, 12:10:49 pm
-
คือผมจะฟอร์แมต+แฟลชเครื่องใหม่ แล้วมันก็หยุดแค่นี้เลยครับ ตั้งค่า baudrate ต่ำสุดก็เป็นเหมือนเดิมครับ เอาเครื่องไหนมาทำก็หยุดแค่นี้ครับผม
Initializing...
DA_LIB_VER_3.5.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 007F227E22212201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: SMS-S02_1V8_IMOBILE_L2EN_205_100203_CAM010_MCP128+32_FM
Changing baudrate to 921600...
Done.
-
แตกไฟล์แล้วเอาไปลงทับของเดิมครับ
http://file.uploadfile.biz/i/EXEVMEIIIDIWEV
-
ขอบใจหลายๆเฮียโอห์ม นี่น้องของพี่ท่านเองค้าบบบบบ 5555++++