ผู้เขียน หัวข้อ: RIFF JTAG - Samsung updates !  (อ่าน 10710 ครั้ง)

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

itmobiz

  • บุคคลทั่วไป
RIFF JTAG - Samsung updates !
« เมื่อ: ตุลาคม 08, 2011, 02:34:57 pm »
  • Publish
  • Publish
  • ข้อมูลจากคุณ Omap ครับ

    07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)

    Added support for Samsung Galaxy II, OMAP4430 version supported

    http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-ii-omap4430-version-supported-samsung-i9100g-samsung-i9108/

    Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

    07.10.2011    Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)

    Samsung I9108 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface. There is a big variety of versions of Galaxy II devices: GT-I9100, GT-I9100G, GT-I9100L, GT-I9100M, GT-I9100T, GT-I9101, GT-I9103, GT-I9108, GT-I9188, and maybe more. Some of them are based on different hardware platform – the Samsung S5PV310 (Cortex-A9 Dual-Core). Thus make sure first which exact hardware version you have on hands.

    Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
    Current DLL is still a beta one. It will work only with phones which have killed X-Loader.

    To resurrect Samsung I9108:

         Solder JTAG cable to Samsung I9108 JTAG pads;
         Connect USB cable to phone and PC;
         Insert battery;
         Make sure Samsung I9108 is selected in the list of models;
         Make sure a fixed TCK frequency is selected;
         Click Resurrect button;
         Wait till software signals a successful operation completion;
         Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

    To enter download mode:

         Disconnect PC cable;
         Insert battery;
         Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.



    itmobiz

    • บุคคลทั่วไป
    Re: RIFF JTAG - Samsung updates !
    « ตอบกลับ #1 เมื่อ: ตุลาคม 08, 2011, 02:35:06 pm »
  • Publish
  • Publish

  • 07.10.2011  รองรับเครื่อง  Samsung Galaxy II,เวอร์ชั่น OMAP4430 (Samsung i9100G, Samsung i9108)

    เครื่อง Samsung I9108 ใช้ชิพ OMAP4430 (Cortex-A9 Dual-Core). แผ่น JTAG pads จะมีขนาดเล็กมาก; ดังนั้นต้องใช้ความสามารถเฉพาะตัว (ประสพการณ์ที่ดีในการเชื่อมตะกั่ว) เพื่อที่จะเชื่อมสายเข้ากับแผ่นเชื่อมต่อ JTAG กับเครื่องมือถือ และเนื่องจากมือถือซัมซุงกาแลคซี่มีหลายเวอร์ชั่นมาก Galaxy II devices: GT-I9100, GT-I9100G, GT-I9100L, GT-I9100M, GT-I9100T, GT-I9101, GT-I9103, GT-I9108, GT-I9188, และอื่นๆ บางตัวอาจมีความแตกต่างในเรื่องของบอร์ดเครื่อง  – เช่น Samsung S5PV310 (Cortex-A9 Dual-Core). ดังนั้นอย่างแรกที่ควรทำคือ ต้องเข้าใจในบอร์ดมือถือที่จะนำมาทำ.

    หมายเหตุ, วิธีง่ายๆในการเชื่อมต่อผ่านตัว JTAG – คือ ต่อสาย USB เข้ากับเครื่องคอมฯ แล้วค่อยใส่แบตตาม ในกรณีนี้เครื่องจะเปิดขึ้นเองโดยอัตโนมัติ
    ขณะนี้ไฟล์ DLL ที่ใช้จะยังคงเป็นเวอร์ชั่นทดลองอยู่ ดังนั้นจึงใช้งานได้กับมือถือที่ส่วนของโหลดเดอร์ X-Loader ได้รับความเสียหายเท่านั้น.

    วิธีการซ่อม Samsung I9108:

         เชื่อมสาย JTAG เข้ากับเครื่อง Samsung I9108 ผ่านทางแผ่น JTAG pads;
         เชื่อมต่อสาย USB ไปที่มือถือและค่อยต่อกับเครื่องคอมฯ;
         ใส่แบตเตอรี่;
         เลือกรุ่น Samsung I9108 ให้ถูกต้อง;
         เลือก fixed TCK frequency;
         กดปุ่ม Resurrect;
         รอจนกระทั่งโปรแกรมแจ้งว่าการทำงานเสร็จสิ้น;
         ถอดสาย USB , ถอดการเชื่อมตะกั่วออกจากแผ่น JTAG wires;

    ตอนนี้เครื่องก็จะสามารถบู๊ทได้แล้ว หรือ หากเครื่องยังไม่สามารถเปิดขึ้นได้เป็นปกติ ก็ใช้การแฟลชเครื่อง โดยใช้ไฟล์ศูนย์และโปรแกรม Samsung downloader software เพื่อที่จะทำให้เครื่องกลับมาทำงานเป็นปกติ.

    การทำเครื่องให้เข้าสู่โหมดดาวน์โหลด:

         ถอดสายจากเครื่องคอม;
         ใส่แบต;
         กดปุ่ม ลดเสียง และปุ่ม Home ค้างไว้ทั้งคู่ แล้วค่อยกดปุ่มเปิดเครื่องตาม

    ออฟไลน์ daun11

    • Newbie
    • *
    • กระทู้: 1
    • คะแนนน้ำใจ: 0
    Re: RIFF JTAG - Samsung updates !
    « ตอบกลับ #2 เมื่อ: มีนาคม 27, 2015, 10:14:47 am »
  • Publish
  • Publish
  • ขอบคุณ

     


    Facebook Comments