ผู้เขียน หัวข้อ: Phoenix_Service_Software_2011_38_003_46817_Cracked.rar  (อ่าน 3977 ครั้ง)

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

itmobiz

  • บุคคลทั่วไป
Phoenix_Service_Software_2011_38_003_46817_Cracked.rar
« เมื่อ: ตุลาคม 04, 2011, 08:35:50 am »
  • Publish
  • Publish
  • เครดิตคุณ hyperbrain,และคุณ jubjang

    Main component versions in the release:

    • DK2 Driver Version 07.14.0.25
    • Nokia Connectivity Cable USB Driver Version 7.1.45.0
    • Flash Update Package 2011.34.000
    • FLS-x Drivers Version 2.09.28
    • FUSE Connection Manager v 2011.34.1

    MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.24.2.46258

    New Products added
    • RM-814, RM-815, RM-816, RM-781, RM-832, RM-833, RM-834, RM-761, RM-762, RM-799, RM-800, RM-764, RM-778

    New features
    • New version of FUSE connection Manager
    • New version of Flash Update Package
    • New version of Autotuning components
    • New version of Product API
    • New version of Connectivity Cable Driver
    • Support for Windows 7 64 bit version (Note: FLS- 5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit operating systems)
    • New installation package with MS Visual C++ 2010

    Error Corrections & changes
    • Installation package now includes MS Visual C++ 2010 Redistributable Package. Installation will happen automatically when Phoenix_Service_Software_2011_38_3_46817.exe is run.
    • The Envira Tool ( The ZIP package generator in Help / Troubleshooting – menu) updated
    • Correction to DCT-4 autotuning with Willtek / Aeroflex test equipment detection. Testers were previously identified only if they reported themselves as Willtek. Testers are now identified also as Aeroflex.
    • Improvements to Product Code changes with simultaneous flashing. Readiness to flash future “USB Only” – concept phones added. NOTE: Please see product specicic documents for information on the restrictions of product code changes with “flash” – option, especially in the cases of Software downgrade with Tucson system!
    • Updated label printing components
    • Support for long product codes
    Please note:
    • Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement. Phoenix installation will check PC for the DOT.NET version and update it automatically when PC has online connection. Without online connection, old DOT.NET versions must be updated manually.
    • New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
    • All Nokia Service Software Applications will use following location for product specific data:
    - Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
    - Windows 7: C:\Program Data\Nokia\Packages
    • Please see articles SR1774 and 1786 for more information on the use of Nokia Data Package manager – tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
    • During installation, Data Packages should be installed in these directories, if they install to any other location by default. target folder for local data packages can be changed in the installation wizard manually
    • This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
    • Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
    • For more information concerning new options in “Firmware Update” – menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
    • Tucson operations combined with “flash” – option are now handled in the same way as “refurbishment”, which requires Mass Memory Content File to be available.
    • Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
    • Connection media to FLS-5 must be configured to be “USB_FBUS”, after FLS-4 support has been removed FBUS does not work anymore with FLS-5
    • Install and use the latest available product specific data packages or flash bundles

    Supported operating systems and user rights

    • Windows XP Service Pack 1 or higher
    • When installing Phoenix into Win XP you must have local admin rights.
    • When using in Win XP, user must have power user rights.
    • Windows 7 32 Bit version
    • Windows 7 64 Bit version

    http://www.mirrorcreator.com/files/1IKSOSWI/



    itmobiz

    • บุคคลทั่วไป
    Re: Phoenix_Service_Software_2011_38_003_46817_Cracked.rar
    « ตอบกลับ #1 เมื่อ: ตุลาคม 04, 2011, 08:59:41 am »
  • Publish
  • Publish
  • Phoenix_Service_Software_2011_38_003_46817_Cracked.rar


    ส่วนประกอบหลักของเวอร์ชั่นใหม่นี้:

    • ไดร์เวอร์ DK2 เวอร์ชั่น 07.14.0.25
    • ไดร์เวอร์ Nokia Connectivity Cable USB เวอร์ชั่น 7.1.45.0
    • อัพเดทการแฟลชรุ่นมือถือเป็นรุ่น 2011.34.000
    • ไดร์เวอร์FLS-x เวอร์ชั่น 2.09.28
    • โปรแกรมเชื่อมต่อ FUSE Connection Manager v 2011.34.1

    การเปลี่ยนแปลงหลักๆและข้อบกพร่องที่ได้รับการแก้ไขจากเวอร์ชั่นที่แล้วเวอร์ชั่น 2011.24.2.46258

    เพิ่มรุ่นมือถือใหม่ๆ
    • RM-814, RM-815, RM-816, RM-781, RM-832, RM-833, RM-834, RM-761, RM-762, RM-799, RM-800, RM-764, RM-778

    เครื่องมือใหม่
    • เวอร์ชั่นใหม่ของFUSE connection Manager
    • เวอร์ชั่นใหม่ของFlash Update Package
    • เวอร์ชั่นใหม่ของAutotuning components
    • เวอร์ชั่นใหม่ของProduct API
    • เวอร์ชั่นใหม่ของConnectivity Cable Driver
    • รองรับวินโดว์ Windows 7 64 บิท (หมายเหตุ: ไดร์เวอร์ชั่น FLS- 5 จะไม่รองรับกับระบบปฏิบัติการ 64 บิท, ดังนั้นหากใช้การเชื่อมต่อ FLS-5 /USB_FBUS กับระบบ 64 บิท จะไม่สามารถทำงานได้
    • เพิ่มโปรแกรมการติดตั้ง  MS Visual C++ 2010

    การแก้ไขข้อบกพร่องและการเปลี่ยนแปลง
    • โปรแกรมการติดตั้ง ซึ่งรวมถึงโปรแกรม MS Visual C++ 2010 Redistributable Package. การติดตั้งจะเป็นแบบอัตโนมัติ เมื่อทำการเปิดโปรแกรม Phoenix_Service_Software_2011_38_3_46817.exe
    • เครื่องมือการทำงาน The Envira Tool ( The ZIP package generator in Help / Troubleshooting – menu) updated
    • แก้ไขการทำงานแบบอัตโนมัติของ DCT-4 autotuning กับการตรวจจับอุปกรณ์ Willtek / Aeroflex test equipment detection. ตัวทดสอบรุ่นก่อนจะทำแค่การแยกแยะตรวจจับเท่านั้น หากหากตัวทดสอบ ตรวจพบว่าเป็น Willtek เท่านั้น แต่โปรแกรมใหม่จะแสดงเป็น Aeroflex ได้ด้วย.
    • ปรับปรุงการเปลี่ยนแปลงโค๊ดเครื่อง ด้วยการจำลองการแฟลช การอ่านแฟลชจะใช้วิธีผ่านสาย USB เท่านั้น - หมายเหตุ: โปรดอ่านเอกสารเกี่ยวกับข้อควรระวังของการเปลี่ยนแปลงรหัสสินค้า โปรดักโค๊ด ด้วยวิธีการแฟลช โดยเฉพาะอย่างยิ่งในกรณี ของการดาวน์เกรดเครืองสำหรับระบบ Tucson system!
    • อัพเดท การพิมพ์ฉลากของส่วนประกอบต่างๆ
    • รองรับรหัสสินค้า โปรดักโค๊ดยาวๆ ได้
    หมายเหตุ:
    • จะต้องลงโปรแกรม Microsoft DOT.NET version 2 Service Pack 2 เป็นอย่างน้อย การติดตั้งโปรแกรม Phoenix จะทำการตรวจสอบเกี่ยวกับเครื่องคอมฯ ได้ลงโปรแกรม DOT.NET หรือยัง สำหรับเรื่อง เวอร์ชั่น และจะทำการอัพเดทเวอร์ชั่นให้โดยอัตโนมัติ เมื่อมีการเชื่อมต่อเน็ต หากไม่มีการต่อเน็ตต้องทำการอัพเดทโปรแกม DOT.NET ด้วยตัวเอง
    • ต่อไปข้อมูล common data package จะถูกใช้ในโปรแกรมด้วย โปรดอ่านจากเอกสารหมายเลข SR1315 ใน KICS Information Center สำหรับรายละเอียดเพิ่มเติม
    • ที่ตั้งของโปรแกรมทั้งหมดของ Nokia Service Software Applications จะถูกใช้ตามข้อมูลต่างๆตามลักษณะของเครื่องมือถือที่ใช้:
    - สำหรับ Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
    - สำหรับ Windows 7: C:\Program Data\Nokia\Packages
    • โปรดอ่านเอกสารหมายเลข SR1774 และ 1786 สำหรับข้อมูลเพิ่มเติม สำหรับการใช้งานโปรแกรม Nokia Data Package manager – เครื่องมือ, และเอกสาร SR1854 สำหรับรายละเอียดเพิ่มเติมในเรื่อง Nokia Service Application Manager Tool.
    • ระหว่างการติดตั้งโปรแกรม ข้อมูล Data Packages จะถูกติดตั้งในไดเร็กทอรี่ต่างๆ หากทำการเปลี่ยนไดรเร็กทอรี่เปลี่ยนไปจากที่ตั้งไว้ ข้อมูลแพ็คเกจต่างๆ ต้องเปลี่ยนแปลงตามการติดตั้งให้ถูกต้องด้วย
    • เวอร์ชั่นใหม่นี้จะบรรจุส่วนประกอบของ Tucson ไว้ล่าสุด. ดังนั้นไม่จำเป็นต้องใช้โปรแกรมการเพิ่ม Tucson Add-On Installation Packagesอีก
    • ก่อนเริ่มการทำงานใหม่ สำหรับโปรแกรม Phoenix หรือ Care Suite สำหรับ Windows 7 ต้องทำการปิดการใช้งานโปรแกรม the User Account Control (UAC) ซึ่งทำได้จาก Windows Control Panel settings.
    • ข้อมูลเพิ่มเติม สำหรับตัวเลือก “Firmware Update” – ในหัวข้อเมนูและการใช้งน ให้อ่านได้จากเอกสารเลขที่ SR1313 และ SR1659 ใน ศูนย์ข้อมูล KICS Information Center.
    • การรวมการทำงานด้าน “flash” ของ Tucson  – จะมีตัวเลือกในการใช้งานแบบเดียวกับการใช้งาน “refurbishment”, ที่ต้องการไฟล์ของ Mass Memory Content File อยู่ด้วย.
    • การใช้งานด้านตัวเลือกของ Flash สามารถทำได้เวลาเดียวกับการเปลี่ยนแปลง product code ผ่านสาย USB เท่านั้น และแนะนำให้ทำแยกกันระหว่างการแฟลชเครื่องกับการเปลี่ยนแปลงอื่นๆ อ้างถึงคู่มือการทำงานด้านเฉพาะของสินค้า
    • การเชื่อมต่อมือถือกับ FLS-5 จะต้องตั้งค่าเป็น “USB_FBUS”, หลังจากยกเลิกการใช้งาน FLS-4  ที่ไม่สามารถใช้งานด้าน FBUS กับสายใหม่ FLS-5ได้
    • การติดตั้งและการใช้ข้อมูลแพ็กเกจต่างๆ ควรให้อัพเดทใหม่ล่าสุดเสมอ

    ระบบปฏิบัติการที่รองรับ

    • Windows XP Service Pack 1 or higher
    • When installing Phoenix into Win XP you must have local admin rights.
    • When using in Win XP, user must have power user rights.
    • Windows 7 32 Bit version
    • Windows 7 64 Bit version

    http://www.mirrorcreator.com/files/1IKSOSWI/

    nazi

    • บุคคลทั่วไป
    Re: Phoenix_Service_Software_2011_38_003_46817_Cracked.rar
    « ตอบกลับ #2 เมื่อ: ตุลาคม 31, 2011, 09:58:15 pm »
  • Publish
  • Publish
  •  ;) ;) thanks alot ขอบคุณคร้าบ ขอบคุณคร้าบ ขอบคุณคร้าบ

    ออฟไลน์ nin ชูชัยเทเลคอม กรุ๊ป

    • AMT User
    • Newbie
    • *****
    • กระทู้: 32
    • คะแนนน้ำใจ: 0
    Re: Phoenix_Service_Software_2011_38_003_46817_Cracked.rar
    « ตอบกลับ #3 เมื่อ: มีนาคม 19, 2012, 04:51:24 pm »
  • Publish
  • Publish
  • ขอบคุณคับ

    ออฟไลน์ tanawatp

    • Power User
    • Newbie
    • *
    • กระทู้: 38
    • คะแนนน้ำใจ: 0
      • อีเมล์
    Re: Phoenix_Service_Software_2011_38_003_46817_Cracked.rar
    « ตอบกลับ #4 เมื่อ: มิถุนายน 08, 2012, 07:49:47 am »
  • Publish
  • Publish
  • ขอบคุณครับ

     


    Facebook Comments